A Step-By-Step Guide On Installing The Delta Classic Shower Pan On Your Basement Floor

how to install delta classic shower pan on basement floor

If you're looking to add a shower to your basement, the Delta Classic Shower Pan is a fantastic option. Not only is it easy to install, but it also provides a sturdy and reliable base for your shower. In this guide, we'll walk you through the process of installing the Delta Classic Shower Pan on your basement floor, ensuring that you have a beautiful and functional shower in no time. So, grab your tools and let's get started!

shunshelter

Gather materials and tools needed for installing Delta Classic shower pan

Gather
Source: i.ytimg.com

To install a Delta Classic shower pan on a basement floor, you will need to gather the necessary materials and tools beforehand. This preparation will ensure a smooth and efficient installation process. Here is a detailed list of what you will need:

  • Delta Classic shower pan: This is the main component of your shower and serves as the base for the floor. Make sure you choose the appropriate size and design for your space.
  • Measuring tape: Measure the dimensions of your basement floor to ensure that the shower pan fits perfectly.
  • Level: This tool is essential for ensuring that your shower pan is properly aligned and level during installation.
  • Construction adhesive: You will need a strong adhesive to secure the shower pan to the basement floor. Look for a product specifically designed for shower installations.
  • Screwdriver: A screwdriver will be needed to remove any screws or fasteners that may be holding the old shower pan or other fixtures in place.
  • Caulk gun: You will need a caulk gun to apply a waterproof sealant around the edges of the shower pan once it is installed. Choose a caulk that is suitable for use in wet environments.
  • Hole saw: If your shower system requires additional holes for plumbing and drainage, a hole saw will be necessary to create these openings in the shower pan.
  • Adjustable wrench: This tool will be needed to tighten and secure any plumbing connections that are part of your shower system.
  • Safety equipment: Remember to wear safety goggles and gloves throughout the installation process to protect yourself from any potential hazards.

By gathering all the materials and tools mentioned above, you will be well-prepared for the installation of your Delta Classic shower pan on your basement floor. With everything in place, you can proceed with confidence and efficiency.

shunshelter

Prepare the basement floor for installing the Delta Classic shower pan

Prepare
Source: i.ytimg.com

Installing a Delta Classic shower pan on a basement floor requires some initial preparation to ensure a secure and long-lasting installation. Follow these steps to prepare the basement floor for installing a Delta Classic shower pan.

Gather the necessary tools and materials:

  • Tape measure
  • Level
  • Chalk line
  • Circular saw
  • Paintbrush or roller
  • Waterproofing membrane
  • Waterproofing primer
  • Cement board
  • Cement board screws
  • Screwdriver or screw gun
  • Thin-set mortar
  • Notched trowel
  • Measure and mark the location of the shower pan on the basement floor. Use a tape measure to determine the size and position of the shower pan, and mark it with a chalk line. Double-check the measurements to ensure accuracy.
  • Prepare the floor for waterproofing. Use a paintbrush or roller to apply a waterproofing primer to the basement floor. Make sure to cover the entire area within the marked lines. Allow the primer to dry according to the manufacturer's instructions.
  • Apply a waterproofing membrane. Cut the waterproofing membrane to the size of the shower area using a circular saw. Lay the membrane over the primed floor, making sure it extends beyond the marked lines by a few inches. Press the membrane firmly onto the floor, smoothing out any wrinkles or air bubbles.
  • Secure the waterproofing membrane. Use cement board screws to secure the edges of the waterproofing membrane. Place the screws approximately 6-8 inches apart along the perimeter of the shower area. Make sure the screws are flush with the floor but not overtightened, as they can damage the membrane.
  • Install the cement board. Cut cement board panels to fit the shower area using a circular saw. Lay the panels over the secured waterproofing membrane, making sure they are centered within the marked lines. Leave a 1/8-inch gap between the panels to allow for expansion. Secure the cement board to the floor using cement board screws, placing them 6-8 inches apart around the perimeter and every 12 inches in the field.
  • Apply thin-set mortar. Mix thin-set mortar according to the manufacturer's instructions. Use a notched trowel to spread the mortar evenly over the cement board. Comb the mortar with the notched side of the trowel to create ridges, which will help with adhesion.
  • Install the Delta Classic shower pan. Place the Delta Classic shower pan onto the mortar, making sure it is level and centered within the marked lines. Press the shower pan firmly onto the mortar bed to ensure proper adhesion. Use a level to check that the shower pan is level from front to back and side to side.
  • Allow the mortar to dry. Follow the manufacturer's instructions for the drying time of the thin-set mortar. It is essential to let the mortar cure completely before proceeding with further installation steps.

Once the basement floor is properly prepared, you can proceed with the installation of the Delta Classic shower pan. Following these steps will help ensure a secure and stable base for your shower, providing a solid foundation for years to come.

shunshelter

Install the Delta Classic shower pan following the manufacturer's instructions

Install
Source: i.pinimg.com

Installing a Delta Classic shower pan on a basement floor is a great way to add a functional and stylish shower to your space. Before you begin the installation process, make sure you have all the necessary tools and materials. Follow the steps below to properly install the Delta Classic shower pan on your basement floor.

Prepare the Basement Floor:

Ensure that the basement floor is clean, dry, and level. Remove any existing flooring or debris to create a smooth surface for the shower pan installation.

Gather the Materials:

  • Delta Classic shower pan
  • PVC primer and cement
  • Shims
  • Silicone caulk
  • Waterproofing membrane (if required by local building codes)

Check the Dimensions:

Measure the dimensions of the desired shower area to ensure that the Delta Classic shower pan will fit properly. You may need to trim the shower pan to fit if the dimensions are not an exact match.

Install the Drain Assembly:

Refer to the manufacturer's instructions for the specific drain assembly installation process. Typically, you will need to attach the drain assembly to the subfloor using PVC primer and cement. Make sure the drain assembly is securely fastened.

Place the Shower Pan:

Carefully place the Delta Classic shower pan in the desired location on the basement floor. Ensure that the drain aligns with the drain assembly installed in the previous step.

Level the Shower Pan:

Use a level to ensure that the shower pan is completely level in all directions. If necessary, use shims to adjust and level the shower pan.

Secure the Shower Pan:

Follow the manufacturer's instructions to secure the shower pan to the basement floor. This may involve using construction adhesive or screws, depending on the specific model of the Delta Classic shower pan.

Apply Silicone Caulk:

Apply a bead of silicone caulk around the edges of the shower pan, where it meets the basement floor. This will provide a waterproof seal and prevent any water leakage.

Waterproofing Membrane (if required):

Check with your local building codes to determine if a waterproofing membrane is required for your basement shower installation. If necessary, install the waterproofing membrane according to the manufacturer's instructions before placing the shower pan.

Allow Time for Drying and Curing:

After completing the installation, allow sufficient time for the adhesive, caulking, and cement to dry and cure. This will vary depending on the specific products used, so refer to the manufacturer's instructions for the recommended drying time.

By following these steps and the manufacturer's instructions, you can successfully install the Delta Classic shower pan on your basement floor. Enjoy your new shower!

shunshelter

Test the Delta Classic shower pan for leaks and make any necessary adjustments

Test
Source: i.pinimg.com

If you're installing a Delta Classic shower pan on your basement floor, it's crucial to test the shower pan for leaks before moving forward with the rest of the installation. This step will help you ensure that your shower will function properly and prevent any potential water damage in your basement. Here's a step-by-step guide on how to test the Delta Classic shower pan for leaks and make any necessary adjustments.

  • Assemble the drain flange: Start by unpacking the drain flange and disassembling its components. Follow the instructions provided by Delta to assemble the drain flange correctly. Make sure the rubber gasket, compression gasket, and fiber washer are properly placed.
  • Install the drain flange: Place the drain flange into the shower pan's drain hole. Ensure that the drain flange is level and snugly fits into the hole. Use a wrench to tighten the flange nut securely.
  • Connect the drain pipe: Attach the drain pipe to the drain flange. Apply plumber's putty between the drain pipe and the flange to create a watertight seal. Tighten the connection using a wrench.
  • Test the drain for leaks: Fill a bucket with water and pour it directly into the shower pan. Observe the drain for any signs of leaks. If you notice any water escaping from the drain, there may be an issue with the sealing. In such cases, you may need to disassemble the drain flange and check for any misalignments or missing gaskets. Make the necessary adjustments and retest the drain until it no longer leaks.
  • Test the shower pan itself: Fill the shower pan with water to its recommended depth. Allow the water to sit in the pan for an extended period, such as 24 hours. After the designated time, inspect the shower pan for any signs of water leakage. Pay close attention to the seams, corners, and edges of the shower pan. If you notice any leaks, you may need to apply additional sealant or adjust the pan's positioning to correct the issue.
  • Address any leaks and adjustments: If you discover any leaks during the testing process, don't proceed with the rest of the installation until all leaks are resolved. Depending on the severity of the leaks, you may need to consult a professional plumber or contact Delta's customer support for further assistance. Remember, it's crucial to address any leaks before proceeding, as these could lead to water damage and potentially costly repairs in the future.

By following these steps to test the Delta Classic shower pan for leaks and making the necessary adjustments, you can ensure the proper function and durability of your basement shower. Taking the time to test and address any leaks before completing the installation will save you from potential headaches down the line and give you peace of mind while using your new shower.

Frequently asked questions

Before installing the shower pan, you must ensure that your basement floor is level and free from any debris or imperfections. If needed, you may need to use a self-leveling compound to even out the surface. It is also important to check for any moisture or water issues in the basement, as these can affect the installation and performance of the shower pan.

To install a Delta Classic shower pan, you will need a few basic tools and materials. These include a measuring tape, level, drill, hacksaw, PVC primer and cement, rubber gasket or silicone sealant, and the necessary plumbing connections. Additionally, you will need the Delta Classic shower pan itself, which should come with installation instructions and any specific hardware required.

The exact installation process may vary depending on the specific model and manufacturer's instructions, but generally, the steps involve measuring and marking the location of the drain on the basement floor, cutting a hole for the drain, applying primer and cement to secure the drain, connecting the necessary plumbing, applying a rubber gasket or silicone sealant around the drain, and then attaching the shower pan to the drain. It is crucial to follow the manufacturer's instructions carefully to ensure proper installation and prevent any leakage or damage.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment