Fixing A Fridge Dent

how to repair dent in fridge door

Removing a dent from your fridge door can be a tricky task, and it largely depends on the size and location of the dent. While some suggest that dents in fridge doors cannot be popped out due to the structural integrity of the fridge cabinet, there are some methods you can try. For example, using heat and cold, such as blowing hot air directly onto the dent with a hair dryer or using dry ice to contract the metal. Alternatively, you could try using suction tools, such as an automotive dent remover or even a simple toilet plunger. If these methods don't work, you may need to call in a professional, which will cost around $275 on average.

Characteristics Values
Average cost of repairing a refrigerator door dent $275
Normal range of cost $150 - $300
Hourly rate of appliance repair technicians $45 - $120
One-time service fee $150 - $200
Cost of DIY refrigerator door dent removal kit $20 - $50
Cost of professional appliance dent repair $100 - $300
Cost of refrigerator door seal replacement Less than $50
Cost of having refrigerator coils professionally cleaned $75 - $150
Average cost of refrigerator door replacement Not stated

shunshelter

Using heat and cold

Stainless steel appliances respond to heat and cold, so you can take advantage of the expansion and contraction that comes with temperature changes to remove or reduce a dent. Here are some ways to do this:

Using Heat

Blow hot air directly onto the dent using a hairdryer, or a heat gun if you have one. Give it a minute or so to heat up the metal. The metal will expand and may pop back into its original form as it cools and contracts.

Using Cold

Try using something very cold, like dry ice, immediately after applying heat. Hold the dry ice against the dent for a minute or so, until the metal is cold. Make sure to wear gloves to protect your hands. The rapid cooling may cause the dent to pop out.

Combining Heat and Cold

You can also try combining the two methods above. First, apply heat, then follow up with cold to rapidly cool the metal down.

Alternatively, try using a can of compressed air, like the ones used to clean computer parts and keyboards. Hold the can upside down and spray the dent and the area around it. The chilled carbon dioxide may pop the dent out as it warms.

Fixing Storm Door Hinges

You may want to see also

shunshelter

Using suctioning tools

Using suction tools to repair a dent in your fridge door can be an effective method, but it may require some patience and repetition. Here is a step-by-step guide on how to do it:

Step 1: Clean the Area

First, you will need to clean the dented area to ensure that the glue adheres properly. Use isopropyl alcohol or a cleaning solution provided with a dent repair kit. Keep in mind that cleaning the area may remove the finish, so consider this method as a last resort if other approaches fail.

Step 2: Purchase an Automotive Dent Remover Kit

You can find automotive dent remover kits online or at auto parts stores. These kits typically include small suction cups that you will glue onto the dent.

Step 3: Prepare the Suction Cup

Heat up a hot glue gun, and select a suction cup that is slightly larger than the dent. Apply a small amount of glue to the cup and carefully place it onto the dent. A high-temperature glue gun may provide better adhesion.

Step 4: Assemble the Bar and Plates

The suction cup will have a screw coming off the back, onto which you will attach a bar with two plates on each side. Place the knob that screws into the back of the suction cup and lightly screw it into place. Don't push down too hard at this point, as everything is not yet fully assembled.

Step 5: Adjust the Plates

Adjust the plates as close to the middle suction cup as possible to avoid pulling up the metal too much on the outer edges. This adjustment will help ensure that the force is focused on the dented area.

Step 6: Screw the Center Piece

Now that everything is in place, keep screwing the knob in the center. This action will put pressure on the suction cup and slowly pull it out. With enough pressure, the dented area should pop back into place.

Step 7: Repeat as Needed

This process may need to be repeated several times to achieve the desired result. Dents may not pop out with a single attempt, so be prepared to be patient and persistent.

Alternative Suction Methods:

If you don't want to use glue, you can try a simple toilet plunger or a vacuum cleaner with a small suction cup attached to the hose. Place the plunger or suction cup over the dent and apply pressure to pull it out. While not as precise as the glue method, this approach may still work for smaller dents.

Don's Garage Door Fix

You may want to see also

shunshelter

Hiring a professional

  • Specialized Tools and Techniques: Professionals use specialized tools and dent-removal kits that are designed specifically for reversing dents. They can apply heat or suction to restore the original shape of the door without leaving any marks or affecting the appliance's surface.
  • Experience and Expertise: Appliance repair specialists have extensive knowledge and experience in handling dents of all sizes and complexities. They can quickly assess the dent and determine the best course of action, whether it's using pressure and suction or more advanced techniques.
  • Safety: Repairing a refrigerator door dent can be risky if you don't have the proper training. Professionals know how to handle heating devices and other tools safely, reducing the risk of skin burns or irritation.
  • Cost-Effectiveness: While hiring a professional may seem expensive upfront, it can save you money in the long run. DIY attempts can sometimes result in larger dents or further damage, leading to more costly repairs or even the need for a full door replacement.
  • Time Savings: Repairing a refrigerator door dent can be a time-consuming process, especially if you're doing it for the first time. Professionals can complete the job quickly and efficiently, allowing you to get back to your regular routine sooner.
  • Warranty and Guarantee: When you hire a reputable appliance repair company, they often provide warranties or guarantees for their work. This means that if the dent reappears or any issues arise due to their repair work, they will fix it at no additional cost.

When choosing a professional to repair your refrigerator door dent, it's important to select a qualified and experienced technician. Look for companies that specialize in appliance repairs and have a good reputation in your area. Reading online reviews and getting recommendations from friends or family can also help you make an informed decision.

Clopay Garage Door Installation Guide

You may want to see also

shunshelter

DIY repair kits

GLISTON Paintless Dent Repair Remover Kit

This 45-piece kit includes a dent puller/lifter, bridge puller, hot glue gun, pry tools, puller tabs, glue sticks, plastic shovels, an empty alcohol bottle, a cloth, and an instruction manual. The kit is constructed from high-quality aluminum alloy and stainless steel and is easy to operate. Some dents can be repaired in as little as 30 minutes. However, the included hot glue and hot glue gun may not stick the tabs to the refrigerator door as well as expected.

GS DIY Paintless Dent Repair Kit Metal Tap Down Pen

This is a simple and inexpensive kit that includes only a metal tap-down pen. To use this kit, you must choose the ideal head size and shape for the dent and tap the area around it with a hammer or another tool. This method requires good technique and will not work on large dents.

Wcaro Car Auto Body Dent Removal with PDR Rods

This kit includes PDR rods, a rubber hail repair hammer, a metal tap-down pen, and a plastic wedge. The PDR rods can be fed in between the sheet metal of your refrigerator, allowing you to access the backside of the dent and push it outward. This method requires patience and is more expensive, costing over $100.

Anyyion 54-Piece Paintless Dent Repair Kit

This comprehensive kit includes a glue gun, glue sticks, a dent lifter, a rubber hammer, taps, clip removal tools, glue tabs, plastic shovels, mini bags, a cleaning cloth, a toolbox, and more. This kit is ideal for removing multiple dents of varying sizes, such as those caused by hail. However, it is pricey and may not be necessary for removing only a couple of dents.

AUTOPDR 40-Piece DIY Paintless Dent Removal Tool Kit

This kit includes many of the same components as larger kits, such as a hot glue gun, glue, a dent lifter, a tap-down pen, a rubber hammer, puller tabs, a small plastic scraper, and more. It is suitable for removing large to medium-sized dents but may not work on very small dents. This kit requires patience and gradual pulling to achieve results.

Manelord Car Dent Puller

This kit is designed for use on thin metal surfaces and is not suitable for metal surfaces exceeding 1mm in thickness. It includes a double pole bridge dent puller, glue puller tabs, glue shovels, an empty alcohol bottle, and a cleaning cloth. The arched bridge on the dent puller allows for easy adjustment to accommodate different dent sizes. However, this kit does not include a glue gun or glue sticks, which must be purchased separately.

How to Fill Hollow Core Doors

You may want to see also

shunshelter

Prevention

To prevent your fridge door from getting dented, it's important to take some precautionary measures. Here are some tips to help you avoid those unsightly dents:

Understand the Causes

Knowing what causes dents in the first place can help you prevent them. Fridge doors, especially modern ones, are typically made with a thin sheet of metal on the outside and polystyrene on the inside. This metal exterior is prone to dents when bumped or hit with force. Even a small object can leave a noticeable dent. Understanding this vulnerability will help you be more careful when handling objects near your fridge.

Create a Safe Environment

Take a good look at the placement of your fridge. Is it in a high-traffic area where people are constantly moving around? Are there any objects nearby that could potentially hit the fridge door? Rearranging your kitchen layout or simply moving the fridge to a safer spot can greatly reduce the chances of dents. Ensure there is enough clearance when the door is opened, and try to keep the area around it free from potential hazards.

Use Protective Gear

Consider investing in some protective gear for your fridge door. There are various products available, such as fridge door handles or edge guards, that can act as a barrier between the door and potential hazards. These guards are made from materials like rubber or plastic and can absorb minor impacts, reducing the likelihood of dents. They are easy to install and can be cut to fit the size of your fridge door.

Be Mindful of What's Inside

The contents of your fridge can also play a role in preventing dents. Overloading the shelves or placing heavy items on the door can increase the chances of dents occurring when the door is opened or closed with force. Distribute the weight evenly inside the fridge, and avoid placing heavy items on the door shelves to reduce the strain on the metal.

Educate Others

If you live with family or roommates, it's important to educate them about the vulnerability of fridge doors to dents. Encourage everyone to be mindful when opening and closing the door, and to be cautious when handling objects nearby. This shared awareness can lead to a collective effort to keep the fridge door dent-free.

By following these prevention tips, you can significantly reduce the chances of your fridge door getting dented. Taking proactive measures will save you the time and hassle of repairing dents and help maintain the aesthetic appeal of your fridge.

Fix Sliding Patio Door Like a Pro

You may want to see also

Frequently asked questions

The average cost to fix a refrigerator door dent is $275, but the price can range from $150 to $300 depending on the size and location of the dent.

You can attempt to repair a dent in a fridge door yourself using a DIY kit, which costs between $20 and $50. However, you risk making the dent larger or leaving a mark on the refrigerator door. Professionals have access to specialised tools and dent-removal kits, and they can assess whether the dent is severe enough to require a door replacement.

You can attempt to repair a dent in a fridge door using heat and cold, or with suction tools. For the heat and cold method, blow hot air directly onto the dent using a hair dryer or heat gun, then allow the metal to cool and contract. Alternatively, hold dry ice or regular ice onto the dent to rapidly cool the metal. For the suction method, clean the area with isopropyl alcohol, then use an automotive dent remover or a toilet plunger to pull out the dent.

No, not all dents can be repaired at home. The steel exterior of a refrigerator is extremely thin, so it may not be possible to "pop out" a dent. If the metal has stretched and become thinner, the dent may still warp outwards even if you are able to pull it out. In this case, you may need to call a professional or consider replacing the fridge door.

To prevent dents in your fridge door, place the refrigerator in a spot where no other doors can touch it. Avoid opening the refrigerator door when holding metal pans, knives, or other heavy or sharp objects that could cause contact and result in dents or punctures.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment